1. PRODUCT AND COMPANY

TRADE NAME :

PENGUIN NON-STOP
APPLICATION : Selvpolerende bunnstoff
PRODUCER/IMPORTER :
Company : JOTUN-HENRY CLARK LTD.
Address : Flixborough, Scunthorpe
Zip && city : North Lincolnshire DN15 8RR
Telephone : +44 1724 40 00 00
Fax : +44 1724 40 01 00
Emergencyphones : Contact the National Poison Center
Contactperson : QA/Environm. dept., JOTUN A/S
Responsible : QA/Environm. dept., JOTUN A/S
2. COMPOSITION OF PRODUCT
No Ingredients name CAS-NO Weight% Dangerclas./Cmnt.
1
 AROMATIC HYDROCARBONS, C9-C12
 64742-95-6
 10-25
 Xn,Fo,N,10-20-37-65-51/53
2
 COLOPHONY
 8050-09-7
 2,5-10
 Xi;Sens,43
3
 XYLENE, mixed isomers
 1330-20-7
 10-25
 Xn,20/21-38
4
 DICHLOFLUANID (ISO)
 1085-98-9
 1-2,5
 Xi,36-43
5
 DIKOPPEROXIDE
 1317-39-1
 25-50
 Xn,22
6
 CUPROUS THIOCYANATE
 000111-67-7
 10-25
 Xn,20/21/22-32
Legend: T+=Very toxic, T=Toxic, C=Corrosive, Xn=Harmful, Xi=Irritant, IK=No classification required, E=Explosive, O=Oxidising, F+=Extremely flammable, F=Very flammable, Fo=Flammable, N=Dang. to the environment,

INGREDIENT COMMENTS

Substances presenting a health hazard within the meaning of the current issue of the CHIP Regulations or assigned occupational exposure limits.
3. HAZARD IDENTIFICATION
 Harmful 
FLAMMABLE. HARMFUL BY INHALATION, IN CONTACT WITH SKIN AND IF SWALLOWED. MAY CAUSE SENSITIZATION BY SKIN CONTACT. For potential danger for the environment, see section 12.
4. FIRST AID

GENERAL

In all cases of doubt, or when symptoms persist, seek medical attention. Never give anything by mouth to an unconscious person.

INHALATION

Remove to fresh air, keep the patient warm and at rest. If breathing has stopped, administer artificial respiration. Place in stable position on one side and keep warm with blankets etc. Seek medical advice.

SKIN CONTACT

Remove contaminated clothing. Wash skin thoroughly with soap and water or use an appropriate skin cleaner. Do NOT use solvents or thinners.

EYE CONTACT

Remove any contact lenses. Hold the eyelids apart. Irrigate copiously with clean, fresh water for at least 10 minutes. Seek medical advice if symptoms persist.

INGESTION

DO NOT INDUCE VOMITING. If accidentally swallowed obtain immediate medical attention. Keep at rest. Seek medical advice.

MEDICAL INFORMATION

Risk of chemical pneumonia by aspiration. Keep attention: danger of lung damage. General health examination. Professional evaluation of the work station.
5. FIRE FIGHTING MEASURES

PROPER FIREFIGHTING EQUIPMENT

Recommended: alcohol resistant foam, CO2, powders, water spray. Not to be used: water jet.

FIRE AND EXPLOSION HAZARDS

Decomposition products may be a hazard to health. Fire will produce dense black smoke containing hazardous products of combustion (see Section 10).

PERSONAL PROTECTION WHEN FIREFIGHTING

The personal protective equipment required is provided in section 8. Professional fire-fighters are required to use an air-fed system when dealing with major fires.
6. ACCIDENTAL RELEASE MEASURES

OTHER INFORMATION

If the product enters drains or sewers, the local water company should be contacted immediately; in the case of contamination of streams, rivers or lakes, the Environmental Agency. Clean preferably with a detergent; avoid use of solvents. Do not allow to enter drains or watercourses. Contain and collect spillage with non-combustible absorbent materials, e.g. sand, earth, vermiculite and diatomaceous earth. Place in container for disposal according to local regulations (see section 13). Refer to protective measures listed in sections 7 and 8. Avoid breathing vapours. Exclude sources of ignition and ventilate the area.
7. HANDLING AND STORAGE

HANDLING ADVICE

Vapours are heavier than air and may spread along floors. Vapours may form explosive mixtures with air. Prevent the creation of flammable or explosive concentrations of vapour in air and avoid vapour concentration higher than the occupational exposure limits. The product should not be used in vicinity of open flames or other sources of ignition. Use explosion-proof electrical equipment. The product may charge electrostatically. Allways use earth (ground) wire when transferring from one container to another. Personnel should wear anti-static clothing and footwear. Floors should be electrically conductive. Keep container tightly closed. Exclude sources of heat, sparks and open flame. Use non-sparking tools. Avoid skin and eye contact. Avoid inhalation of vapour and spray mist. Smoking, eating and drinking are forbidden in the work area. For personal protective equipment see Section 8. Always keep in containers made of the same material as the supply container. Never use pressure to empty: the container is not a pressure vessel. Electrical equipment should be protected to appropriate standards. The Manual Handling Operations Regulations may apply to the handling of containers of this product.

STORAGE

Store in accordance with the regulations for flammable materials. Observe the label precautions. Store in a dry, cold and well ventilated place away from sources of heat, ignition and direct sunlight. Store separately from oxidising agents and strongly alkaline and strongly acidic materials. No smoking. Containers which are opened should be properly resealed and kept upright to prevent leakage.
8. EXPOSURE CONTROL/PERSONAL PROTECTION

OEL's:

Ingredients name CAS-no OEL value OEL
AROMATIC HYDROCARBONS, C9-C12
 64742-95-6
 125.0 mg/m3
XYLENE, mixed isomers
 1330-20-7
 441.0 mg/m3 Sk
662.0 mg/m3 Sk		 LTEL
STEL

EXPOSURE CONTROL

OELs are taken from the current version of EH40 (by Health & Safety Executive, UK). Spray mist contains all substances of the product and must not be inhaled. Where reasonably practicable this should be achieved by the use of local exhaust ventilation and good general extraction. Provide adequate ventilation.

RESP. PROTECTION

Gas mask with combined filter (gas filter A2/dust filter P2) may be necessary when spraying. Gas mask with filter A (brown, organic substances) may be necessary.

EYE PROTECTION

Eye protection designed to protect against liquid splashes should be worn.

HAND PROTECTION

Barrier creams should not be applied once exposure has occurred. Barrier creams may help to protect exposed areas of the skin but are not substitutes for full physical protection. Use PVA/viton gloves.

SKIN PROTECTION

When spraying use suit covering the whole body. Wear anti-static clothing made of natural fibre or of heat resistant synthetic fibre.
9. PHYSICAL AND CHEMICAL PROPERTIES
Form: Liquid.
Colour: Various.
Odour: Organic solvent.
Solubility: Organic solvent.
 
Melting point/range: - Density: 1.60
Expl. limit LEL-UEL%: 1.10 - 7 - Boiling point/range: 138 - 177ºC
Flash point: 30ºC pH concentrate: -
Viscosity: 300 cP Ignition temp.: 270ºC
10. STABILITY AND REACTIVITY

STABILITY

Stable under recommended storage and handling conditions (see section 7).

MATERIALS TO AVOID

Keep away from oxidising agents, strongly alkaline and strongly acidic materials to prevent the exothermic reactions.

HAZARDOUS DECOMPOSITION PRODUCTS

In a fire , hazardous decomposition products such as smoke, carbon monoxide, carbon dioxide and oxides of nitrogen may be produced.
11. TOXICOLOGICAL INFORMATION

GENERAL

There are no toxicological data available on the product itself.

INHALATION

Inhalation of smoke (from a fire or from welding on dicopper oxide coated material) may give symptoms like influenza. Symptoms and signs include headache; dizziness, fatigue, muscular weakness, drowsiness and in extreme cases, loss of consciousness. Exposure to organic solvent vapours may result in adverse health effects such as irritation of the mucous membrane and the respiratory system and adverse effects on the renal and central nervous system.

SKIN CONTACT

Repeated or prolonged contact with the product may lead to removal of natural fats from the skin resulting in non-allergic contact dermatitis and absorption through the skin. Organiske løsningsmidler avfetter huden.

EYE CONTACT

Splashes in the eyes may cause irritation and reversible local damage.

INGESTION

May cause liver and kidney damage. Absorbed by the gastric intestinal system. Chemical pneumonia can occur if solvents are inhaled. Swallowing in connection with accidents can result in vomiting and stomach pain.
12. ECOLOGICAL INFORMATION

OTHER INFORMATION

The product contains aromatic hydrocarbons C9-C12 labelled "Dangerous for the environment". There is no data available on the product itself.
13. DISPOSAL
Waste must be disposed of at approved landfill/waste storage or traement facility. Do not allow into drains or water courses. Wastes, including emptied containers, are controlled wastes and should be disposed of in accordance with regulations made under the Control of Pollution Act and the Environmental Protection Act.

WASTEGROUP

08 01 02 waste paints and varnish free of halogenated solvents. 08 00 00 WASTES FROM THE MANUFACTURE, FORMULATION, SUPPLY AND USE (MFSU) OF COATINGS (PAINTS, VARNISHES AND VITREOUS ENAMELS), ADHESIVE, SEALANTS AND PRINTING INKS.
14. TRANSPORT INFORMATION
PROPER SHIPPING NAME PAINT
 
IMDG (Sea)
UN No 1263 Class 3.3
Packaging Group III EmS 3 - 05
MFAG 310 Marine Pollutant P
Page 3372
Not ADR-restricted ref. NOTE under E of marginal 2301 (applicable to receptacles of less than 450 litres capacity). ADR for road, RID for rail and IMDG for sea transport. Transport only in accordance with
15. REGULATORY INFORMATION
Classif.:
 Harmful 

COMPOSITION

AROMATIC HYDROCARBONS, C9-C12 (10-25), COLOPHONY (2,5-10), XYLENE, mixed isomers (10-25), DICHLOFLUANID (ISO) (1-2,5), DIKOPPEROXIDE (25-50), CUPROUS THIOCYANATE (10-25)

R-PHRASES

R43 May cause sensitization by skin contact. R20/21/22 - Harmful by inhalation, in contact with skin and if swallowed. R10 Flammable.

S-PHRASES

S46 If swallowed, seek medical advice immediately and show this container or label. S38 In case of insufficient ventilation, wear suitable respiratory equipment. S36/37 Wear suitable protective clothing and gloves. S23 Do not breathe vapour/spray. S2 Keep out of reach of children.

REFERENCES

The product is classified and labelled for supply in accordance with the current issue of CHIP Regulations, and the latest version of the approved supply list.
16. OTHER INFORMATION

INFORMATION SOURCES:

VENDOR NOTES

The information contained in this MSDS is based on the present state of knowledge and current national legislation. As the specific conditions of use of the product are outside the supplier's control, the user is responsible for ensuring that the requirements of relevant legislation are compiled with. The information in this MSDS provides guidance on health, safety and environmental aspects of the product and should not be construed as any guarantee of technical performance or suitability for particular applications. The Environmental Protection (Duty of Care) Regulations 1992 (SI 1992:2839). Further information and relevant advice can be found in: The Control of Substances Hazardous to Health Regulations 1988 (SI1988:1657). The Highly Flammable Liquids and liquefied Petroleum Gases Regulations 197 (SI 1972:917). The Manual Handling Operations Regulations 1992 (SI 1992:2793). Storage of Flammable Liquids in Containers, HS(G)51. Storage of Packaged Dangerous Substances, HS(G)71. The selection, use and maintenance of respiratory protective equipment: A practical guide HS(G)53.

USER NOTES