1. PRODUCT AND COMPANY

TRADE NAME :

OXAN AU
SYNONYMS : OXAN GULVMALING FOR BETONG, VANNBASERT
APPLICATION : Modified acrylate latex paint
PRODUCER/IMPORTER :
Company : JOTUN-HENRY CLARK LTD.
Address : Flixborough, Scunthorpe
Zip && city : North Lincolnshire DN15 8RR
Telephone : +44 1724 40 00 00
Fax : +44 1724 40 01 00
Emergencyphones : Contact the National Poison Center
Contactperson : QA/Environm. dept., JOTUN A/S, NORWAY
Responsible : QA/Environm. dept., JOTUN A/S, NORWAY
2. COMPOSITION OF PRODUCT
No Ingredients name CAS-NO Weight% Dangerclas./Cmnt.
1
 N-METHYL-2-PYRROLIDONE
 872-50-4
 2,5-10
 Xi,36/38
Legend: T+=Very toxic, T=Toxic, C=Corrosive, Xn=Harmful, Xi=Irritant, IK=No classification required, E=Explosive, O=Oxidising, F+=Extremely flammable, F=Very flammable, Fo=Flammable, N=Dang. to the environment,

INGREDIENT COMMENTS

Substances presenting a health hazard within the meaning of the current issue of the CHIP Regulations or assigned occupational exposure limits.
3. HAZARD IDENTIFICATION
There are no riskphrases given for this product according to EU-legislation. For potential danger for the environment, see section 12.
4. FIRST AID

GENERAL

In all cases of doubt, or when symptoms persist, seek medical attention. Never give anything by mouth to an unconscious person.

INHALATION

Remove to fresh air, keep the patient warm and at rest. If breathing has stopped, administer artificial respiration. Place in stable position on one side and keep warm with blankets etc. Seek medical advice.

SKIN CONTACT

Remove contaminated clothing. Wash skin thoroughly with soap and water or use an appropriate skin cleaner. Do NOT use solvents or thinners.

EYE CONTACT

Remove any contact lenses. Hold the eyelids apart. Irrigate copiously with clean, fresh water for at least 10 minutes. Seek medical advice if symptoms persist.
5. FIRE FIGHTING MEASURES

PROPER FIREFIGHTING EQUIPMENT

Recommended: alcohol resistant foam, CO2, powders, water spray. Not to be used: water jet.

FIRE AND EXPLOSION HAZARDS

Decomposition products may be a hazard to health. Fire will produce dense black smoke containing hazardous products of combustion (see Section 10). The product is not combustible.

PERSONAL PROTECTION WHEN FIREFIGHTING

The personal protective equipment required is provided in section 8. Professional fire-fighters are required to use an air-fed system when dealing with major fires.
6. ACCIDENTAL RELEASE MEASURES

OTHER INFORMATION

If the product enters drains or sewers, the local water company should be contacted immediately; in the case of contamination of streams, rivers or lakes, the Environmental Agency. Clean preferably with a detergent; avoid use of solvents. Do not allow to enter drains or watercourses. Place in container for disposal according to local regulations (see section 13). Contain and collect spillage with non-combustible absorbent materials, e.g. sand, earth, vermiculite and diatomaceous earth. Refer to protective measures listed in sections 7 and 8. Provide adequate ventilation.
7. HANDLING AND STORAGE

HANDLING ADVICE

Avoid skin and eye contact. Smoking, eating and drinking are forbidden in the work area. For personal protective equipment see Section 8. Always keep in containers made of the same material as the supply container. The Manual Handling Operations Regulations may apply to the handling of containers of this product.

STORAGE

Observe the label precautions. Keep out of frost. Store in a dry, cold and well ventilated place away from sources of heat, ignition and direct sunlight. Store separately from oxidising agents, strongly alkaline and strongly acid materials. Containers which are opened should be properly resealed and kept upright to prevent leakage.
8. EXPOSURE CONTROL/PERSONAL PROTECTION

OEL's:

Ingredients name CAS-no OEL value OEL
N-METHYL-2-PYRROLIDONE
 872-50-4
 103.0 mg/m3,Sk
309.0 mg/m3,Sk		 LTEL
STEL

EXPOSURE CONTROL

Spray mist contains all substances of the product and must not be inhaled. Provide adequate ventilation.

RESP. PROTECTION

Dust filter P2 may be necessary when spraying the product.

EYE PROTECTION

Eye protection designed to protect against liquid splashes should be worn.

HAND PROTECTION

Barrier creams should not be applied once exposure has occurred. Barrier creams may help to protect exposed areas of the skin but are not substitutes for full physical protection. Use nitrile or neoprene gloves.

SKIN PROTECTION

When spraying use suit covering the whole body. Protective clothing when necessary.
9. PHYSICAL AND CHEMICAL PROPERTIES
Form: Liquid.
Colour: Various.
Odour: Characteristic.
Solubility: Easily soluble in: Water.
 
Melting point/range: - Density: 1,06 - 1,19
Viscosity: 170 cP
10. STABILITY AND REACTIVITY

STABILITY

Stable under recommended storage and handling conditions (see section 7).

MATERIALS TO AVOID

Keep away from oxidising agents, strongly alkaline and strongly acidic materials to prevent the exothermic reactions.

HAZARDOUS DECOMPOSITION PRODUCTS

In a fire , hazardous decomposition products such as smoke, carbon monoxide, carbon dioxide and oxides of nitrogen may be produced.
11. TOXICOLOGICAL INFORMATION

GENERAL

There are no toxicological data available on the product itself.

SKIN CONTACT

May irritate the skin.

EYE CONTACT

Splashes in the eyes may cause irritation and reversible local damage.
12. ECOLOGICAL INFORMATION

OTHER INFORMATION

The product contains a substance that can degrade in the environment to form nonylphenol. Nonylphenol is concidered to be "Harmfull for the environment". There is no data available on the product itself.
13. DISPOSAL
Waste must be disposed of at approved landfill/waste storage or traement facility. Do not allow into drains or water courses. Wastes, including emptied containers, are controlled wastes and should be disposed of in accordance with regulations made under the Control of Pollution Act and the Environmental Protection Act.

WASTEGROUP

08 01 03 waste from water-based paints and varnishes. 08 00 00 WASTES FROM THE MANUFACTURE, FORMULATION, SUPPLY AND USE (MFSU) OF COATINGS (PAINTS, VARNISHES AND VITREOUS ENAMELS), ADHESIVE, SEALANTS AND PRINTING INKS.
14. TRANSPORT INFORMATION
Transport only in accordance with ADR for road, RID for rail and IMDG for sea transport. The product is not classified as dangerous goods for carriage.
15. REGULATORY INFORMATION
Classif.:

S-PHRASES

S23 Do not breathe vapour/spray. S2 Keep out of reach of children.

REFERENCES

The product is classified and labelled for supply in accordance with the current issue of CHIP Regulations, and the latest version of the approved supply list.
16. OTHER INFORMATION

INFORMATION SOURCES:

VENDOR NOTES

The information contained in this MSDS is based on the present state of knowledge and current national legislation. As the specific conditions of use of the product are outside the supplier's control, the user is responsible for ensuring that the requirements of relevant legislation are compiled with. The information in this MSDS provides guidance on health, safety and environmental aspects of the product and should not be construed as any guarantee of technical performance or suitability for particular applications. The Environmental Protection (Duty of Care) Regulations 1992 (SI 1992:2839). Further information and relevant advice can be found in: The Control of Substances Hazardous to Health Regulations 1988 (SI1988:1657). The Highly Flammable Liquids and liquefied Petroleum Gases Regulations 197 (SI 1972:917). The Manual Handling Operations Regulations 1992 (SI 1992:2793). Storage of Flammable Liquids in Containers, HS(G)51. Storage of Packaged Dangerous Substances, HS(G)71. The selection, use and maintenance of respiratory protective equipment: A practical guide HS(G)53.

USER NOTES